|
||
| Welcome to MotoCrossMechanic.Com! | ||
 |
MACH-1 EXHAUST SYSTEM BY PRO-TEC
Pro-Tec Racing Mach-1 Exhaust System for All Yamaha Rhinos. An increase of 23% in Horse Power!!! Low RPM Power is increased as well!!! U.S. Dept. of Forestry approved Spark Aresstors included. With an after market CDI you can see upto 31% in Speed of the Rhino as well!!! An insert is available to quite the exhaust up. $ 869.95 |
|
| Check Out | ||
 |
Sound Suppression Quite Insert
Use this to Quite the MACH-1 Exhaust System up. Ultra Quite Inserts. $ 17.95 |
|
| Check Out | ||
 |
MIKUNI HSR 45MM CARB KIT BY PRO-TEC
This Carb was designed to give you the most performance out of your Rhino Modified Motors!!! Dyno Tested for Maxinum air and horsepower gains!!! Even works great with just a bolt on Exhaust System!!! Kit comes with the 45mm HSR Mikuni Carb, Throttle Cable, Throttle Cable brackets and all necessary hardware to install complete. $ 459.95 |
|
| Check Out | ||
 |
PRO-FLOW AIR FILTER KIT (FOAM)
Pro-Design Pro-Flow filter kit includes a billet alauminum air filter adapter that bolts into the stock air box and a foam filter. The billet adapter has a o-ring seal to keep dirt and dust out of the motor from the air filter. $ 96.95 |
|
| Check Out | ||
|
PRO-FLOW AIR FILTER KIT (K&N )
Same as the Filter above but with a K&N Filter instead of the Foam Filter. $ 124.95 |
|
| Check Out | ||
 |
MOFLOW INTAKE PLENUM SYSTEM
MOFLOW Air plenum intake system. Cool Fresh Air System. Includes all needed for this install. Fits Stock and 45mm Carbs. Ceramic coated intake tube for maxinum air flow!!! High Volume K&N Filter with an Water replent pre-filter. This filter was designed to trap the cool air feedback from the motor so that the next draw is cool and fresh are for max power!!! $ 479.95 |
|
| Check Out | ||
 |
TWISTED LABS SUSPENSION KIT
Now this is a Complete Suspension Kit!!! Comes with A-arms that are 4130 Chromoly tubing, HD Tie Rods, 14.5 Travel, Front and Rear!!! Powder Coated Finish. Shocks are remote mount resevoirs, adjustabel dampening, 2" Bodies with 20MM Shafts! Billet Alloy Construction. The Axels are Heat Treated 8620 Chromoly. Cad Plated. $ 3895.00 |
|
| Check Out | ||
|
TWISTED LABS SUSPENSION KIT
Same Suspension Kit as above but with King or Walker Evans Shocks!!! $ 4695.95 |
|
| Check Out | ||
 |
RHINO 727CC BIG BORE KIT
The Big Bore Kit by Pro-Tec Racing will increase the overall Performance and Horse Power to your Rhino's Motor!!! Great Low End Performance gains!!! Kit includes a New Moly 2000 Chrome-moly alloy cylinder sleeve. 105MM High compression forged light weight piston. Head gasket, Piston pin, C-Clips, Rings. NEED IT DONE??? SEND YOUR MOTOR OR CYLINDER IN FOR THE WORK! CALL 661-299-2324 FOR MORE DETAILS $ 239.95 |
|
| Check Out | ||
|
RHINO 686CC BIG BORE KIT
The Big Bore Kit by Pro-Tec Racing will increase the overall Performance and Horse Power to your Rhino's Motor!!! Great Low End Performance gains!!! Kit includes a 102MM 10.75:1 forged light weight piston for Pump gas or a 12:1 High compression Piston available for those who want more power and run Race Gas. Head gasket, Piston pin, C-Clips, Rings. NEED IT DONE??? SEND YOUR MOTOR OR CYLINDER IN FOR THE WORK! CALL 661-299-2324 FOR MORE DETAILS OR EMAIL $ 239.95 |
|
| Check Out | ||
 |
HIGH FLOW MIKUNI FUEL PUMP
The Stock Fuel filter can not keep up with Modified Rhino Motors so run this High Volume fuel pump. Rated at 18 Gallons per Hour. $ 59.95 |
|
| Check Out | ||
 |
CARRILLO CONNECTING ROD
This Connecting Rod by Carrillo Manufacturing is the very best for any Modified Rhino Motor!!! Magnafluxed 3 times to make certain that the quality would be there! Designed for the 660 Rhino Motor. Forged and Heat Treated!!! $ 246.95 |
|
| Check Out | ||
 |
CRANKSHAFT PIN
This is the Crankshaft Pin Lower. $ 38.00 |
|
| Check Out | ||
|
LOWER ROD BEARING
Lower Rod Bearing for the Connection Rod. $ 27.00 |
|
| Check Out | ||
 |
HOT CAM CAMSHAFT RHINO
With this Hot Cam Camshaft your Overall performance and accelleration will increase. Top speed also due to the gains in Horse Power!!! Works with Stock Rhinos, with a Pipe, and Modified Rhinos. $ 185.95 |
|
| Check Out | ||
 |
DYNA TEK CDI
This CDI by Dyna-Tek will increase low end performance. Easier Starting. Advance Programing curves for 10+ MPH gain on a Stock Rhino!!! $ 204.95 |
|
| Check Out | ||
|
HIGH PERFORMANCE VALVE & SPRING KIT
After Market High Performance Valves and Springs By Pro-Tec Racing. $ 264.95 |
|
| Check Out | ||
|
RADIATOR KIT W/FAN & SHROUD
After market Radiator kit with fan and shroud $ 564.95 |
|
| Check Out | ||
|
RADIATOR KIT W/FAN & SHROUD & OIL
Same as above but includes a Oil cooler as well for those would really get on thier Rhinos!!! $ 794.95 |
|
| Check Out | ||
 |
RHINO PERFORMANCE PACKAGE STAGE 1
RAS Motorsports Stage one Rhino Kit! You will get the following: Roll Cage, powder coated your Color. Custom made Canapy with snaps to the Roll Cage not! Velcro! Then we will outfit the Front Seats with 3X3 4way Y Harness Seat Belts. The Rear Bench Seat with 2X2 4way Y Harness Seat Belts. All Installed and Tested!!! Call or email with question. $ 2895.00 |
|
| Check Out | ||
Email Us If You Have Any Questions
© 2 0 0 1 - 2 0 0 4 RAS Racing. All Rights Reserved.
Webmaster: webmaster@motocrossmechanic.com